Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E
- Item number
- 10.14.3.1
- Analysis basis
- 5 metre
- Priced inputs
- 9
- Derived rate
- ₹640.20/ METRE
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 10.14.3.1 (Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb) is derived from 9 priced inputs for 5 metre and works out to ₹640.20 per metre after water charges, GST, CPOH and cess. The full build-up is below.
- 2+2+1m=5m
- 50x25x5mm. M.S. Angle for threshold
- 1 metre @ 2.75kg per uds =2.75kg.
- Steel primer
- 500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
- Say 0.03q
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 4008 | MAT | Pressed steel door frames (mild steel sheet 1.60mm) Profile “E”Pressed steel door frames (mild steel sheet 1.60 mm) Profile “E” | metre | 5 | 300.00 | 1,500.00 |
| 0595 | MAT | Bright finished or black enamelled mild steel butt hinges 100x58x1.90 mmBright finished or black enameled ISI marked IS:1341 mild steel pressed butt hinges 100x58x 1.90 mm | 10 Nos | 0.6 | 80.00 | 48.00 |
| 9999 | MAT | Screws, nuts and bolts | L.S. | 35.88 | 2.27 | 81.45 |
| 1007 | MAT | Structurals such as tees,angles channels and R.S. joistsStructural steel such as tees, angles channels and R.S. joists | quintal | 0.03 | 5,965.00 | 178.95 |
| 9977 | MAT | Carriage of material | L.S. | 5.33 | 2.27 | 12.10 |
| 0116 | LAB | Fitter (grade 1) | day | 0.15 | 897.00 | 134.55 |
| 0114 | LAB | Beldar | day | 0.2 | 736.00 | 147.20 |
| 9999 | MAT | Sundries | L.S. | 8.97 | 2.27 | 20.36 |
| SUB | Rate as per item no 13.50.3 of SH : FinishingRate as per item 13.50.3 | sqm | 2.69 | 67.40 | 181.31 |
- TOTAL
- 2,303.92
- Add 1 % Water charges on “W-A”
- +21.23
- TOTAL
- 2,325.15
- Add GST on “X-A” (multiplying factor 0.2127)
- +455.99
- TOTAL
- 2,781.14
- Add 15% CPOH on “Y-A”
- +389.97
- TOTAL
- 3,171.11
- Add Cess @ 1% on “Z-A”
- +29.90
- Cost for 5 metres
- 3,201.01
- Cost for 1 metre
- 640.20
- SAY
- ₹640.20
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 732
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 732. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.