Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe
- Item number
- 17.77.2
- Analysis basis
- 50 nos
- Priced inputs
- 7
- Derived rate
- ₹378.10/ NOS
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.77.2 (Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes)) is derived from 7 priced inputs for 50 nos and works out to ₹378.10 each after water charges, GST, CPOH and cess. The full build-up is below.
- M.S. flats 50x5mm= 50 x 0.81 = 40.5m
- @ 1.97 kg/ metre = 79.8 kg.
- M.S. flats 30x1.6mm =50x2x0.42 = 42m.
- 0.38kg/metre = 16kg.
- Total = 95.8kg.
- Total = 100.6 kg.
- M.S.flats= 100.6kg. = 1.006 quintal
- priming coat
- 50x0.81x0.11 = 4.46
- 50x2x0.42x0.063 = 2.65
- Total =7.11sqm
- P/F expansion hold fasteners 6mm
- threaded dia = 50x4 Nos = 200 nos.
- Add wastage 5% = 4.8kg.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 1007 | MAT | Structurals such as tees,angles channels and R.S. joistsStructural steel such as tees, angles channels and R.S. joists | quintal | 1.006 | 5,965.00 | 6,000.79 |
| 0116 | LAB | Fitter (grade 1) | day | 0.48 | 897.00 | 430.56 |
| 0103 | LAB | Blacksmith 2nd class | day | 0.72 | 816.00 | 587.52 |
| 0114 | LAB | Beldar | day | 0.96 | 736.00 | 706.56 |
| SUB | Rate as per item no 13.85.1 of SH : FinishingRate as per item 13.85.1 | sqm | 7.11 | 70.35 | 500.19 | |
| 9999 | MAT | Sundries | L.S. | 19.8 | 2.27 | 44.95 |
| SUB | Rate asper item no. 8.8.1.1 of SH :- Marble workRate as per item 8.8.1.1 | each | 200 | 36.75 | 7,350.00 |
- TOTAL
- 15,620.57
- Add 1 % Water charges on “W-A”
- +77.70
- TOTAL
- 15,698.27
- Add GST on “X-A” (multiplying factor 0.2127)
- +1,669.29
- TOTAL
- 17,367.56
- Add 15% CPOH on “Y-A”
- +1,427.61
- TOTAL
- 18,795.17
- Add Cess @ 1% on “Z-A”
- +109.45
- Cost of 50 Nos.
- 18,904.62
- Cost of each
- 378.09
- SAY
- ₹378.10
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 1387
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1387. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.