CPWD Analysis of Rates · Sanitary Installations
Providing and fixing PTMT Bottle Trap for Wash basin and sink
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
- Item number
- 17.70.1
- Analysis basis
- Details of cost for one no.
- Priced inputs
- 2
- Derived rate
- ₹367.10 / one no
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.70.1 — Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms — is derived from 2 priced inputs for one no and works out to ₹367.10 per one no after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7493 | PTMT Bottle Trap 31/32MMPTMT - Bottle Trap 31/32 mmMaterial | each | 1 | 212.00 | 212.00 |
| 9988 | Carriage of materials and fixing chargesMaterial | L.S. | 20.28 | 2.27 | 46.04 |
- TOTAL
- 258.04
- Add 1 % Water charges on “W”
- 2.58
- TOTAL
- 260.62
- Add GST on “X” (multiplying factor 0.2127)
- 55.43
- TOTAL
- 316.05
- Add 15% CPOH on “Y”
- 47.41
- TOTAL
- 363.46
- Add Cess @ 1% on “Z”
- 3.63
- Cost of each
- 367.09
- Say
- 367.10
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1382. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works