Providing and fixing plain bend of required degree 100 mm dia
- Item number
- 17.39.1.1
- Analysis basis
- one no
- Priced inputs
- 2
- Derived rate
- ₹470.45/ ONE NO
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.39.1.1 (Providing and fixing plain bend of required degree 100 mm dia Sand cast iron S&S as per IS - 1729) is derived from 2 priced inputs for one no and works out to ₹470.45 per one no after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 1621 | MAT | S.C.I. plain bend 100 mm dia | each | 1 | 300.00 | 300.00 |
| 9988 | MAT | Carriage of materials and fixing charges | L.S. | 13.52 | 2.27 | 30.69 |
- TOTAL
- 330.69
- Add 1 % Water charges on “W”
- +3.31
- TOTAL
- 334.00
- Add GST on “X” (multiplying factor 0.2127)
- +71.04
- TOTAL
- 405.04
- Add 15% CPOH on “Y”
- +60.76
- TOTAL
- 465.80
- Add Cess @ 1% on “Z”
- +4.66
- Cost of each
- 470.46
- SAY
- ₹470.45
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 1337
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1337. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.