CPWD Analysis of Rates · Roofing
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge
- Item number
- 12.53
- Analysis basis
- Details of cost for 100 sqm.
- Priced inputs
- 15
- Derived rate
- ₹2,158.15 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 12.53 — Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge — is derived from 15 priced inputs for 100 sqm and works out to ₹2,158.15 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- Area = 100 sqm + Add 5% wastage = 5 sqm
- Total = 105 sqm
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 8589 | Calcium Silicate tegular edged celling tiles 495x495 mm and 15 mm thickCalcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edgesMaterial | sqm | 105 | 822.00 | 86,310.00 |
| 8590 | Galvanised Steel main Tee ceiling section Size 24x38x0.33mm (3.00 metre long)Galvanised Steel main Tee ceiling section size 24x38x0.33 mm (3 metre long)Material | each | 29.5 | 167.00 | 4,926.50 |
| 8591 | Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 metre long)Material | each | 13.5 | 114.00 | 1,539.00 |
| 8592 | Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33 mm (1.2 metre long)Material | each | 147 | 54.00 | 7,938.00 |
| 8593 | Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33. ( 0.6 metre long)Galvanised Steel intermediate cross T section size 24 x 25 x 0.33 mm (0.6 metre long)Material | each | 147 | 27.00 | 3,969.00 |
| 8615 | Hanger rod 4 mm thickMaterial | each | 72 | 11.00 | 792.00 |
| 8616 | Adjustment clip 85x30x0.8mmAdjustment clip 85x30x0.8 mmMaterial | each | 72 | 7.00 | 504.00 |
| 7388 | Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia boltDash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia boltMaterial | each | 72 | 10.00 | 720.00 |
| 8617 | Soffit cleat (Size 27x37x25x1.60mm)Soffit cleat (Size 27x37x25x1.60 mm)Material | each | 72 | 6.00 | 432.00 |
| 8595 | Wooden screws with plastic rawl plugs 35x8 mmMaterial | each | 100 | 1.50 | 150.00 |
| 9999 | scaffolding etc.Material | L.S. | 498.65 | 2.27 | 1,131.94 |
| 9977 | Carriage of materials etc.Material | L.S. | 237.48 | 2.27 | 539.08 |
| 9999 | SundriesMaterial | L.S. | 310.7 | 2.27 | 705.29 |
| 0111 | Carpenter 1st classLabour | day | 28 | 897.00 | 25,116.00 |
| 0114 | BeldarLabour | day | 23 | 736.00 | 16,928.00 |
- TOTAL
- 1,51,700.81
- Add 1 % Water charges on “W”
- 1,517.01
- TOTAL
- 1,53,217.82
- Add GST on “X” (multiplying factor 0.2127)
- 32,589.43
- TOTAL
- 1,85,807.25
- Add 15% CPOH on “Y”
- 27,871.09
- TOTAL
- 2,13,678.34
- Add Cess @ 1% on “Z”
- 2,136.78
- Cost of 100 sqm.
- 2,15,815.12
- Cost of 1 sqm.
- 2,158.15
- Say
- 2,158.15
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 921. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works