Providing and fixing in position factory made non asbestos fibre reinforced aerated cement sandwich wall/roof/floor light weight solid core panels made of light weight cement concrete core composed of OPC cement, pulverized flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration agent in a preset mould. The outer face on both sides of the panels will be non asbestos fibre cement board conforming to IS 14862:2000. These solid wall panels are installed using Galvanized iron steel tracks/C channel of 1mm thick of required sizes as recommended by manufacturer’s and fixed to floor and RCC soffit in plumb to each other with steel screw/fasteners. The panel shall be fixed vertically with tongue & groove joint with cement based polymer modified jointing compound. The exposed surface finished with fibre mesh/glass fibre tape with polymer based jointing compound having superior flexibility. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-inCharge (Cost of all the material is included except “tracks/C channel” which will be paid separately)
- Item number
- 26.50.2
- Analysis basis
- Details of cost 10sqm (6.95Nos x0.6m
- Priced inputs
- 5
- Derived rate
- ₹1,841.20
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 26.50.2 (Providing and fixing in position factory made non asbestos fibre reinforced aerated cement sandwich wall/roof/floor light weight solid core panels made of light weight cement concrete core composed of OPC cement, pulverized flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration agent in a preset mould. The outer face on both sides of the panels will be non asbestos fibre cement board conforming to IS 14862:2000. These solid wall panels are installed using Galvanized iron steel tracks/C channel of 1mm thick of required sizes as recommended by manufacturer’s and fixed to floor and RCC soffit in plumb to each other with steel screw/fasteners. The panel shall be fixed vertically with tongue & groove joint with cement based polymer modified jointing compound. The exposed surface finished with fibre mesh/glass fibre tape with polymer based jointing compound having superior flexibility. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-inCharge (Cost of all the material is included except “tracks/C channel” which will be paid separately) Non load bearing panels 75 mm thick of required size (minimum 5mm thick fibre cement board Type B, Category III as per IS: 14862:2000 on both faces)) is derived from 5 priced inputs and works out to ₹1,841.20 after water charges, GST, CPOH and cess. The full build-up is below.
- x2.40m = 10sqm)
- Panel area = 10.00sqm, Add wastage @ 5%
- = 0.50sqm, Total area = 10.50 sqm
- For fixing, aligning, locking the panels, glass
- fibre tape/fibre mesh with a jointing compound.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 0245 | MAT | Factory made light weight non asbestos fibre reinforced aerated cement sandwitched wall/roof panel (75mm thick). The outer face on both sides of the panels will be non asbestos fibre cement board (minimum 5mm thick) Type B, Category III conforming to IS 14862:2000Factory made light weight non asbestos fibre reinforced aerated cement sandwitched wall/roof panel (75 mm thick). The outer face on both sides of the panels will be non asbestos fibre cement board (minimum 5 mm thick) Type B, Category III as per IS 14862:2000 | sqm | 10.5 | 860.00 | 9,030.00 |
| 9999 | MAT | Sundries, cement based polymer modified jointing compound, polymer based jointing compound having superior flexibility, fibre glass tape etc | L.S. | 500 | 2.27 | 1,135.00 |
| 0123 | LAB | Mason 1st classMason 1st class | day | 1 | 897.00 | 897.00 |
| 0114 | LAB | Beldar | day | 2 | 736.00 | 1,472.00 |
| 0131 | LAB | Painter | day | 0.5 | 816.00 | 408.00 |
- TOTAL
- 12,942.00
- Add 1 % Water charges on “W”
- +129.42
- TOTAL
- 13,071.42
- Add GST on “X” (multiplying factor 0.2127)
- +2,780.29
- TOTAL
- 15,851.71
- Add 15% CPOH on “Y”
- +2,377.76
- TOTAL
- 18,229.47
- Add Cess @ 1% on “Z”
- +182.29
- Cost of 10 sqm
- 18,411.76
- Cost of 1sqm
- 1,841.18
- SAY
- ₹1,841.20
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 1982
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1982. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.