CPWD Analysis of Rates · New Technologies and Materials
Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super-Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)
75mm thick in Grade M 25 with cement content not less than 330 kg per cum
- Item number
- 26.33.2
- Analysis basis
- Detail of cost for 10 sqm area (0.75cum)
- Priced inputs
- 3
- Derived rate
- ₹853.70 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 26.33.2 — Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super-Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 75mm thick in Grade M 25 with cement content not less than 330 kg per cum — is derived from 3 priced inputs for 10 sqm and works out to ₹853.70 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- M25 concrete 0.75 cum of concrete@ 330
- kg/cum
- Deduction of pumping charges
- @2% of cement 247.50 kg = 247.50X2% =
- 4.95 kg
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| Rate as per Item No.5.33.2.1 of SH: RCCRate as per item 5.33.2.1Sub-analysis | cum | 0.75 | 9,860.40 | 7,395.30 | |
| 0009 | Pumping charges of concrete including Hire charges of pump, piping work & accessories etcPumping charges of concrete including Hire charges of pump, piping work & accessories etc.Machinery | cum | -0.75 | 250.00 | -187.50 |
| 7914 | SBR PolymerMaterial | kg | 4.95 | 200.00 | 990.00 |
- TOTAL
- 8,197.80
- Add 1 % Water charges on “W-A”
- 8.02
- TOTAL
- 8,205.82
- Add GST on “X-A” (multiplying factor 0.2127)
- 172.40
- TOTAL
- 8,378.22
- Add 15% CPOH on “Y-A”
- 147.44
- TOTAL
- 8,525.66
- Add Cess @ 1% on “Z-A”
- 11.30
- Cost of 10 sqm
- 8,536.96
- Cost of 1 sqm
- 853.70
- Say
- 853.70
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1953. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works