Skip to main content

CPWD Analysis of Rates · Concrete Work

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Item number
4.10
Analysis basis
Details of cost for 10 sqm
Priced inputs
6
Derived rate
410.85 / sqm

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) — is derived from 6 priced inputs for 10 sqm and works out to ₹410.85 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

  • Cement concrete 1:2:4 (1 cement : 2 coarse
  • sand (zone-III) : 4 graded stone aggregate 12.5
  • mm nominal size)
  • 10x0.040 = 0.40 cum
  • 20mm size and 12.5mm size
  • Add deduct for difference of cost between
  • Add for delay
CodeInputUnitQuantityRate (INR)Amount (INR)
Rate as per item no 4.1.3 of SH: Concrete workRate as per item 4.1.3Sub-analysiscum0.47,878.503,151.40
0295Stone Aggregate (Single size) : 20 mm nominal sizeMaterialcum-0.671,425.00-954.75
0296Stone Aggregate (Single size) : 12.5 mm nominal sizeMaterialcum0.671,400.00938.00
0123Mason (brick layer) 1st classMason 1st classLabourday0.4897.00358.80
0124Mason (brick layer) 2nd classMason 2nd classLabourday0.4816.00326.40
9999Sundries (Form work etc.)MaterialL.S.1.952.274.43
TOTAL
3,824.28
Add 1 % Water charges on “W-A”
6.73
TOTAL
3,831.01
Add GST on “X-A” (multiplying factor 0.2127)
144.55
TOTAL
3,975.56
Add 15% CPOH on “Y-A”
123.62
TOTAL
4,099.18
Add Cess @ 1% on “Z-A”
9.48
Cost for 10 sqm
4,108.66
Cost for 1 sqm
410.87
Say
410.85

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 183. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works