Skip to main content

Design Checks and Drawings

Calculations and drawings checked before they go out, and shop drawings and as-builts prepared.

01Tender02Bid03Design04Contract
YOU SEND
Calculations and drawings, and the codes they must meet.
PDFDesign calculationsDWGDrawings for issuePDFApplicable codes
WE PREPARE
Our AI does the first pass and marks anything it isn’t sure of. An engineer resolves every marked item and signs the work off.
YOU GET
A checked set with every issue referenced to the code or drawing it came from, or shop drawings and as-builts kept in step with each revision.
CHECK LOG · PIER CAP CALCULATIONSSIGNED OFF
REFITEMFINDINGSTATUS
C-01Load combinationsCombination missing from setOpen
C-02CoverMatches specificationClosed
C-03ShearWithin capacityClosed

WHAT IT CAN INCLUDE

01

Calculation and code checks

Calculations checked for load combinations, assumptions and results against the codes they must meet, such as IS 456, IRC:112, the Eurocodes, ACI 318 or AASHTO LRFD.

02

Drawing checks

Drawings checked against the calculations and against each other, with every finding logged against the clause or drawing it came from.

03

Shop drawings

Fabrication and installation drawings prepared from the approved design drawings, and revised when the design changes.

04

As-built drawings

Drawings updated to record what was actually built.

QUESTIONS05

Questions about design checks and drawings

Send a project

The calculations and drawings, and the codes they must meet.

The ones your project must meet, for example IS 456 and IRC:112 in India, the Saudi Building Code in the Gulf, or the Eurocodes, ACI 318 and AASHTO LRFD elsewhere.

As a check log. Every issue is marked on the set, explained, and referenced to the code clause or drawing it came from.

Send revisions as they're issued. We update the affected shop drawings so site works from the current set.

Yes. We're happy to sign an NDA before you share any calculations or drawings.
NEXT SERVICEContract Management